NETGEAR DG632 - ADSL Modem Router, Reference Manual

Page: 32 / 132

Reference Manual for the Model DG632 ADSL Modem Router
3-10 Connecting the Modem to the Internet
• Dynamic IP assignment
• A login protocol such as PPPoE or PPPoA
Next, the Setup Wizard will report which connection type it has discovered, and then display
the appropriate configuration page. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your modem and the ADSL line. When
the connection is properly made, the modem’s Internet LED should be on.
5.
The ADSL settings for the multiplexing method and VPI/VCI will update with the preset
defaults. The multiplexing method preset default settings will usually work. Only change the
multiplexing method if you are sure your ISP requires Virtual Path Identifier (VPI) or Virtual
Channel Identifier (VCI) settings that are different from the default values.
Incorrect VPI or VCI settings will prevent you from connecting to the Internet. To change
these settings, click the ADSL Settings link on the main menu.
The procedures for filling in the configuration page for each type of connection follow below.
Wizard-Detected PPPoE Login Account Setup
If the Setup Wizard determines that your Internet service account uses a login protocol such as
PPP over Ethernet (PPPoE), you will be directed to the PPPoE page shown in
Figure 3-10 :
Figure 3-10: Setup Wizard menu for PPPoE login accounts
Enter the PPPoE login user name and password.