Advanced Settings
99
D6300 WiFi DSL Modem Router
6.
(Optional) Select or clear the
Keep Existing Wireless Settings
check box.
By default, the Keep Existing Wireless Settings check box is selected. NETGEAR
recommends that you leave this check box selected.
If you clear this check box, the next time a new wireless client uses WPS to connect to
the modem router, the modem router wireless settings change to an automatically
generated random SSID and security key.
7.
Click the
Apply
button.
Your changes are saved.
Use the Modem Router as a Wireless Access Point
You can set up the modem router to run as an access point (AP) on the same local network
as another router or gateway.
To set up the router as an AP after you set up your Internet:
1.
Use an Ethernet cable to connect the Internet port of this modem router to a LAN port
on your existing router or gateway.
Cable this port to a LAN port
on another router
2.
Launch a web browser from a computer or WiFi device that is connected to the network.
3.
Enter
http://www.routerlogin.net
.
A login window displays.
4.
Enter the WiFi DSL Modem Router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
5.
Select
ADVANCED > Advanced Setup > Wireless Settings
.
The Wireless Settings page displays.
6.
Select the
use other operation mode
radio button.
7.
Select the
Enable AP Mode
radio button.
