NETGEAR genie ADVANCED Home
45
D6300 WiFi DSL Modem Router
-
Single PC - no Subnet
. Select this option if there is no LAN (only a single
computer) at the remote endpoint.
If this option is selected, no additional data is required.
-
Single address
. Enter an IP address in the Single/Start IP address field.
This value must be an address on the remote LAN. Typically, this setting is used
when you wish to access a server on the remote LAN.
-
Range address
. Enter the starting IP address in the Single/Start IP address field,
and the finish IP address in the Finish IP address field.
This range must be an address range used on the remote LAN.
-
Subnet address
. Enter an IP address in the Single/Start IP address field, and the
desired network mask in the Subnet Mask field.
The remote VPN endpoint must have these IP addresses entered as its local
addresses.
•
IKE
.
-
Direction/Type
. This setting is used to determine if the IKE policy matches the
current traffic. Select the desired option.
-
Responder only
. Incoming connections are allowed, but outgoing connections
are blocked.
-
Initiator and Responder
. Both incoming and outgoing connections are allowed.
-
Exchange Mode
. Currently, only Main Mode is supported. Ensure that the remote
VPN endpoint is set to use Main Mode.
-
Diffie-Hellman (DH) Group
. When the VPN connection keys are exchanged, the
Diffie-Hellman algorithm is used. The DH Group setting determines the bit size
used in the exchange. This value must match the value used on the remote VPN
gateway.
-
Local Identity Type
. Select the desired option to match the Remote Identity Type
setting on the remote VPN endpoint.
-
WAN IP Address
. Your Internet IP address.
-
Fully Qualified Domain Name
. Your domain name.
-
Fully Qualified User Name
. Your name, email address, or other ID.
-
Local Identity Data
. Enter the data for the selection. When WAN IP Address is
selected, no input is required.
-
Remote Identity Type
. Select the desired option to match the Local Identity Type
setting on the remote VPN endpoint.
-
IP Address
. The Internet IP address of the remote VPN endpoint.
-
Fully Qualified Domain Name
. The domain name of the remote VPN endpoint.
-
Fully Qualified User Name
. The name, email address, or other ID of the remote
VPN endpoint.
