NETGEAR genie Advanced Home
23
C3000 WiFi Cable Modem Router
•
If your ISP gave you one or two DNS addresses, select
Use These DNS Servers
and
type the primary and secondary addresses.
•
Otherwise, select
Get Automatically from ISP
.
Note:
If you get address not found errors when you go to a website, it is
likely that your DNS servers are not set up correctly. Contact your
ISP to get the DNS server addresses.
Wireless Setup
For information about the fields on this screen, see
View or Configure Your Wireless Network
on page
16.
WAN Setup
The WAN Setup screen lets you configure a DMZ (demilitarized zone) server and enable the
modem router to respond to a ping on the WAN (Internet) port.
To change the WAN settings:
From the Advanced tab, select
Setup > WAN Setup
.
The following screen displays:
•
Disable IPv4 Firewall Protection
. Firewalls protect your gateway and connected
devices from external attacks. The firewall is enabled by default.
•
Disable Port Scan and DoS Protection
. DoS protection protects your LAN against
denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, Teardrop