User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
4-2
Web-Based Management Interface
202-10102-01, May 2005
Web Based Management Overview
The menu options available are: System Management, Switch, Routing, Traffic Management, and
Smart Wizard. There is a help menu in the top of right side of screen; you can click the ‘help’ or
the question mark to read the help menu.
The help menu contains:
•
Web-Based Management
Introduction to the Web management features.
•
Device Management
Introduction of the basic icons and management of the device
•
Interface Operations
Describes Web browser requirements, and common commands
•
Product Overview
Describes supported SNMP and Web management features
•
Summary of Features
Feature List
How to Log In to the Managed Switch
The NETGEAR 7200 Series Layer 2 Managed Switch can be configured remotely from Microsoft
Internet Explorer browser version 5.0 or above, or Netscape Navigator web browser version 4.78
or above.
1.
Determine the IP address of your managed switch.
2.
Open a Web browser such as Internet Explorer or Netscape Navigator.
3.
Log in to the managed switch using whatever IP address the unit is currently configured with.
Use the default user name of
admin
and default of no password, or whatever LAN address and
password you have set up.
.
Figure 4-2: GSM7248 IP address in browser address bar
Summary of Contents for 7200 Series
Page 4: ...202 10102 01 May 2005 iv ...
