manualshive.com logo in svg

NETGEAR 7200 Series, User Manual

The Cisco 7200 Series is a high-performance network router that offers excellent scalability and flexibility for enterprise networks. Ensure compliance and safety with the comprehensive Regulatory Compliance and Safety Information Manual, available for free download from manualshive.com. Discover how to optimize your network securely and efficiently with this essential manual.

Share
Download
background image

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

Switching Commands

8-109

202-10102-01, May 2005

•

To set the IGMP maximum response for an interface or VLAN see the 

•

To set the Multicast Router Present Expiration time on an interface or VLAN see the

set igmp

This command enables IGMP Snooping on the system (Global Config Mode) or an interface 
(Interface Config Mode). 

This command also enables IGMP snooping on a particular VLAN, and in turn enabling IGMP 
snooping on all interfaces participating in this VLAN.

If an interface which has IGMP Snooping enabled is enabled for routing or is enlisted as a member 
of a port-channel (LAG), IGMP Snooping functionality will be disabled on that interface. IGMP 
Snooping functionality will subsequently be re-enabled if routing is disabled or port-channel 
(LAG) membership is removed from an interface that has IGMP Snooping enabled.

Note: 

The IGMP application supports the following: 

•

Validation of the IP header checksum (as well as the IGMP header checksum) and discarding 
of the frame upon checksum error.

•

Maintenance of the forwarding table entries based on the MAC address versus the IP address.

•

Flooding of unregistered multicast data packets to all ports in the VLAN. 

Default   

disabled

Format  

set igmp

 

<vlanId>

Modes  

Global Config

  

Interface Config

  

Vlan Mode

no set igmp

This command disables IGMP Snooping on the system. 

Format  

no set igmp

 

<vlanId>

Modes  

Global Config

  

Interface Config

  

Vlan Mode

Summary of Contents for 7200 Series



























































































































































































































































































Reviews:

No comments

Related manuals for 7200 Series

Barracuda Networks NG Network Access Client SP4 Administrator'S Manual preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 268
DAVIS Vantage Pro2 Updater Getting Started Manual preview
Vantage Pro2 Updater
Brand: DAVIS Pages: 12
Patton electronics ForeSight 6300 NMS Getting Started Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 117
VMware vSphere 4 Architecture And Performance preview
vSphere 4
Brand: VMware Pages: 19
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Brand: Sybase Pages: 70
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
Braunschweiger Flammenfilter PROTEGO QuEST Quick Manual preview
PROTEGO QuEST
Brand: Braunschweiger Flammenfilter Pages: 4
Brother BT-1000 User Manual preview
BT-1000
Brand: Brother Pages: 22
Brother iPrint&Scan Manual preview
iPrint&Scan
Brand: Brother Pages: 115
Symantec WISE LINUX PACKAGE EDITOR 8.0 Reference preview
WISE LINUX PACKAGE EDITOR 8.0
Brand: Symantec Pages: 69
Arturia Prophet V User Manual preview
Prophet V
Brand: Arturia Pages: 117
Navman SmartST Professional User Manual preview
SmartST Professional
Brand: Navman Pages: 60
Navman Smart 2005 User Manual preview
Smart 2005
Brand: Navman Pages: 68
Autodesk 495B1-05A111-1301 - 3ds Max Design 2010 User Manual preview
495B1-05A111-1301 - 3ds Max Design 2010
Brand: Autodesk Pages: 916
Focusrite Forte Suite User Manual preview
Forte Suite
Brand: Focusrite Pages: 16
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual preview
15606-011408-9005 - MAP R6.3 NAMED-10U PK
Brand: Autodesk Pages: 332
Vaisala Veriteq viewLinc 3.6 Administrator'S Manual preview
Veriteq viewLinc 3.6
Brand: Vaisala Pages: 122
Parallel Parallels Desktop 4.0 Brochure & Specs preview
Parallels Desktop 4.0
Brand: Parallel Pages: 2

Brands by name

Popular brands

Load more brands