User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Security Commands
9-11
202-10102-01, May 2005
Format
dot1x timeout {{reauth-period <seconds>} | {quiet-
period <seconds>} | {tx-period <seconds>} | {supp-tim-
eout <seconds>} | {server-timeout <seconds>}}
Mode
Interface Config
no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to the default values. Depending on the token used, the corresponding default values are
set.
Format
no dot1x timeout {reauth-period | quiet-period | tx-
period | supp-timeout | server-timeout}
Mode
Interface Config
dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
Format
dot1x user <user> {<slot/port> | all}
Mode
Global Config
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
no dot1x user <user> {
<
slot/port
>
| all}
Mode
Global Config
show radius accounting
This command is used to display the configured RADIUS accounting mode, accounting server and
the statistics for the configured accounting server.
Format
show radius accounting [statistics <ipaddr>]
Mode
Privileged EXEC
If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and the
RADIUS accounting server details are displayed.
Summary of Contents for 7200 Series
Page 4: ...202 10102 01 May 2005 iv ...
