Product Manual, TNSR 19.02
Linux driver and then try again.
FreeBSD
The device associated with the system console is likely to show up as
/dev/cuaU0
. Look for messages about the
device attaching in the system log files or by running
dmesg
.
Note:
If the serial device is not present, ensure the device has power and then check again.
Launch a Terminal Program
Use a terminal program to connect to the system console port. Some choices of terminal programs:
Windows
For Windows the best practice is to run
or
. An example of how to configure PuTTY is
below.
Warning:
Do not use
Hyperterminal
.
macOS
For macOS the best practice is to run GNU
screen
, or
cu
. An example of how to configure GNU
screen
is below.
Linux
For Linux the best practices are to run GNU
screen
,
minicom
, or
dterm
. Examples of how to
configure PuTTY and GNU
screen
are below.
FreeBSD
For FreeBSD the best practice is to run GNU
screen
or
cu
. An example of how to configure GNU
screen
is
below.
Client-Specific Examples
PuTTY in Windows
• Open PuTTY and select
Session
under
Category
on the left hand side.
• Set the
Connection type
to
Serial
• Set
Serial line
to the
console port determined previously
• Set the
Speed
to
115200
bits per second.
• Click the
Open
button
PuTTY will then display the console.
1.1. Netgate Appliances
7
Summary of Contents for 1537-1U
