Netgate 1537-1U, Product Manual

Page: 47 / 66

Product Manual, TNSR 19.02
(continued from previous page)
tnsr(config-interface)# description eth1 eni-beaa7c21 WAN
tnsr(config-interface)# exit
This sets an address, brings up the interface, and sets a description to serve as a reminder of the interface identity &
purpose.
Substitute a different Private IP address/mask and description as needed.
Configure LAN interface:
1. Navigate to https://console.aws.amazon.com/ec2/
2. Click
Instances
3. Click the button next to the TNSR interface to select it
4. Look at the bottom of the page, under the Description tab to see Network Interfaces
5. Click on eth2
6. Find the field named “Private IP address” in the popup
7. Configure the interface in the CLI:
tnsr(config)# interface VirtualFunctionEthernet0/7/0
tnsr(config-interface)# ip address 10.5.1.218/24
tnsr(config-interface)# enable
tnsr(config-interface)# description eth2 eni-6fa572f0 LAN
tnsr(config-interface)# exit
tnsr(config)# exit
Again, substitute the interface Private IP address/mask and description as needed.
Check interface status again:
tnsr# show interface
Interface: VirtualFunctionEthernet0/6/0
Description: eth1 eni-beaa7c21 WAN
Admin status: up
Link up, unknown, unknown duplex
Link MTU: 9216 bytes
MAC address: 0a:54:d0:7c:df:c0
IPv4 Route Table: ipv4-VRF:0
IPv4 addresses:
10.5.0.222/24
IPv6 Route Table: ipv6-VRF:0
counters:
received: 798 bytes, 19 packets, 0 errors
transmitted: 1604 bytes, 28 packets, 0 errors
0 drops, 0 punts, 5 rx miss, 0 rx no buffer
Interface: VirtualFunctionEthernet0/7/0
Description: eth2 eni-6fa572f0 LAN
Admin status: up
Link up, unknown, unknown duplex
Link MTU: 9216 bytes
MAC address: 0a:0a:7b:cd:89:6e
IPv4 Route Table: ipv4-VRF:0
IPv4 addresses:
10.5.1.218/24
(continues on next page)
1.2. Cloud Platforms 45