manualshive.com logo in svg

Neteyes NexusWay 800 Series, User Manual, Page: 89 / 118

Share
Download
Neteyes NexusWay 800 Series User Manual Download Page 89

 Multi Service Border Gateway User Manual for NexusWay 800 Series

 

4-2-13 High Availability 

High availability features allow for a second NexusWay device.    This configuration option will 

activation or deactivation of the High Availability features.

 

Function As: 

 

Virtual IP Address 

The Virtual IP Address is the shared gateway address, used by LAN machines.    This virtual 

address ensures that if one devices physically fails, the other can effectively take over, without 

reconfiguring devices on the LAN.

 

 

Alternate IP Address 

The Alternate IP Address is the physical address, of the other NexusWay.

 

allow you to manage all High Availibility options. 

 

High Availability: 

This radio button allows the 

 

This radio button configures which role the active NexusWay will assume in a High Availability 

configuration. 

 

Pages: 88/119

Summary of Contents for NexusWay 800 Series























































































































Reviews:

No comments