manualshive.com logo in svg

Neteyes NexusWay 800 Series, User Manual, Page: 27 / 118

Share
Download
Neteyes NexusWay 800 Series User Manual Download Page 27

 Multi Service Border Gateway User Manual for NexusWay 800 Series

 

„

 

Inbound Policy   

In this option, you can setup the inbound load balancing algorithms causing the inbound traffic 

to be distributed across multiple Internet connections according to the algorithm you select. 

The NexusWay 800 will process outside users linking to your Website and load balance by 

active DNS and Port/IP Mapping, according to each WAN connections Line flow. For more 

setting information, see section 4-2-10. 

 

„

 

NetFlow 

The NexusWay 800 can export network traffic information, in flows, to an external machine that 

runs a NetFlow application and can collect NetFlow data for processing. For more setting 

information, see section 4-2-11. 

 

„

 

Cache 

You can enable a built-in Web Proxy server and a Transparent Proxy in this option. Proxy 

servers are used to improve performance and filter requests while a transparent proxy allows 

client to not change any network settings before having traffic flow through the proxy. For more 

information about the Web proxy server and the transparent proxy, see section 4-2-12. 

 

„

 

URL Filter 

This function allows you to prohibit internal users from viewing certain URL’s for security or 

confidentiality considerations. For more setting information, see section 4-2-13. 

 

„

 

High Availability 

This function allows you to manage configurations for a dual device setup. Configurations can 

be transferred between machines, and the machines selected mode configured. For more 

setting information, see section 4-2-14. 

 

 

Pages: 26/119

Summary of Contents for NexusWay 800 Series























































































































Reviews:

No comments