NetComm VELOCITY NP805N User Manual Download Page 4

Page: 4 / 62

NP805N – Gigabit Wireless Router

NetComm NP805N - Gigabit Wireless Router

YMLO-805N

www.netcomm.com.au

Overview

Introduction

This manual provides information related to the installation, operation, and utilisation of the NP805N.

Target Users

The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts.

Prerequisites

Before continuing with the installation of your NP805N, please confirm that you comply with the minimum system requirements
below.



An activated ADSL, activated 3G, or configured WAN connection.



Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter with TCP/IP
Protocol installed.



A Web Browser such as Internet Explorer, Netscape Navigator, Mozilla Firefox, Opera, Safari etc.



Wireless Computer System Requirements:

Computer with a working 802.11b, 802.11g or 802.11n wireless adapter.

Notation

The following symbols are utilised in this user manual:

The following note requires attention

The following note provides a warning

The following note provides relevant information

Summary of Contents for VELOCITY NP805N































































Search results

Summary of Contents for VELOCITY NP805N

Reviews:

Related manuals for VELOCITY NP805N

Brands by name

Popular brands

NetComm VELOCITY NP805N, User Manual

Search results

Summary of Contents for VELOCITY NP805N

Reviews:

Related manuals for VELOCITY NP805N

Brands by name

Popular brands