www.netcomm.com.au
23
NetComm NP805N – Gigabit Wireless Router
YMLO-805N
PPTP
OPTION
DEFINITION
IP Mode
Select to use either a static or dynamically assigned IP address for your connection. When selecting to utilise a static IP
address, you will also need to enter the PPTP IP Address, PPTP Subnet Mask and PPTP Default gateway in use for the
connection
(Refer to your PPTP administrator for more information)
.
Server IP Address/Name
Enter the PPTP server name or IP Address.
PPTP Account
Enter the PPTP username supplied by your PPTP administrator.
PPTP Password
Enter the PPTP password supplied by your PPTP administrator.
Connection ID
Enter an Optional name to identify the PPTP connection.
Maximum Idle Time
The amount of inactivity on the internet connection before it is disconnected. Set it to zero or enable "Auto-reconnect" to
disable this feature.
Connection Control
There are 3 modes to select from:
Connect-on-demand: The NP805N will connect to the internet when a client sends outgoing packets.
Auto Reconnect (Always-on): The NP805N will automatically reconnect to the internet until the
connection is manually disconnected.
Manually: The NP805N will not connect to the internet until someone clicks the connect button in the
Status-page.
MTU
The default MTU value is 0 (auto). It is set automatically when you connect.
MPPE
Select to enable or disable the MPPE security extensions for the PPTP connection.
Multicast
Enable multicast support for this connection. Select the appropriate IGMP protocol version from the pull down menu.
IGMP Snooping
This option enables or disables "IGMP" for this connection type.
