www.netcomm.com.au
11
NetComm NP805N – Gigabit Wireless Router
YMLO-805N
Hardware installation
1.
Connect the power adapter to the Power socket on the back of the NP805N. Plug the power adapter into the wall socket
and switch on the power.
2.
Wait approximately 60 seconds for the NP805N to power up.
Connecting via a cable
1.
Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NP805N.
2.
Connect the other end of the yellow Ethernet cable to your computer.
3.
Wait approximately 30 seconds for the connection to establish.
4.
Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
5.
Follow the steps to set up your NP805N.
Connecting wirelessly
1.
Ensure Wi-Fi is enabled on your device (computer/laptop/Smartphone).
2.
Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the NP805N.
Please note: Refer to the included Wireless Security Card for the default SSID of your NP805N
3.
When prompted for your wireless security settings, enter the Wireless security key configured on the NP805N.
Please note: Refer to the included Wireless Security Card for the default wireless security key of your NP805N
4.
Wait approximately 30 seconds for the connection to establish.
5.
Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
6.
Follow the steps to set up your NP805N.
