background image

NB1 User Guide 

YML780 Rev1

14 

www.netcomm.com.au

Configuring your NB1

You will need to log directly into the configuration page of  the modem and configure 
the basic settings for your Internet connection. Your ISP should provide you with the 
necessary information to complete this step.

The settings that you most likely need to change to access the Internet are grouped onto 
a single EasyConfig page.

To configure your modem follow the steps below:

Note: 

Ensure that your PC is setup as a DHCP client. Refer to the Computer 
Hardware Configuration section for instructions on how to set this up with 
different Operating Systems.

1.  Insert the CD into your CD-ROM drive.  An autorun screen will appear.  Click on 

Con fig ure Modem.

 

(Alternatively, if the CD-ROM is not available, you can open a web 
browser and type http://192.168.1.1 in the location bar to access the 
modem’s EasyConfig setup screen directly.)

2.  The login page will be displayed. Enter the modem’s username and password.

 

The default username  is 

admin

.

The default password is 

admin

.

 Click 

on 

Log In

.

3.  The EasyConfig  page will be displayed.

Summary of Contents for NB1




























































































Reviews: