Rev.1 - YML618
www.netcomm.com.au
NP1500 Fast Ethernet LAN Adaptor
Page 13
Other Operating systems
For installation instructions for any of the following operating environments please see the
appropriate
Readme.tx
t file on the driver CD ROM:
■
Windows NT 3.51
■
LanServer for OS2
■
LanManager for DOS
■
NDIS 2
■
NetWare Client
■
NetWare Server
Troubleshooting
If you experience any problems with the NP1500 Fast Ethernet LAN Adaptor, first verify that
the appropriate driver is loaded, that the proper grade of cable is employed for the network
connection, and that the supporting hub is functioning properly. If the Card is still not working
properly, the follow these steps before contacting NetComm’s Customer Support Department:
1. Ascertain that the card is fully and firmly seated in the slot connector.
2. Check the length and rating of connecting cables.
3. Ascertain that the card’s PCI slot is not deactivated at the BIOS level. The CMOS Setup
utility in PCI computers ordinarily provides the option to activate or deactivate PCI slots.
4. If you have another PCI slot available, please try the card in the next slot.
5. Install the questioned card in another PCI computer and run the tests again.
6. Remove all other PCI cards from the computer and run the diagnostic tests again. If the
verification/diagnostic run is not normal, then there is probably an interrupt number
conflict, which will have to be resolved manually by a CMOS Setup utility. Reinstall all of
the cards before running the utility.
