40
NetComm Wireless Intelligent M2M Router
www.netcommwireless.com
Routing
Static
Static routing is the alternative to dynamic routing used in more complex network scenarios and is used to facilitate communication between devices on different networks. Static routing involves
configuring the routers in your network with all the information necessary to allow the packets to be forwarded to the correct destination. If you change the IP address of one of the devices in the
static route, the route will be broken.
Figure 43 - Static routing list
Some routes are added by default by the router on initialization such as the Ethernet subnet route for routing to a device on the Ethernet subnet.
Adding Static Routes
To add a new route to the static routing list, click the
+Add
button. The Static routes page appears.
1.
In the
Route name
field, type a name for the route so that it can be identified in the static routing list.
2.
From the
Network interface
drop down list, select the interface for which you would like to create a static route.
3.
In the
Destination IP address
field, enter the IP address of the destination of the route.
4.
In the
IP subnet mask
field, enter the subnet mask of the route.
5.
In the
Gateway IP address
field, enter the IP address of the gateway that will facilitate the route.
6.
In the
Metric
field enter the metric for the route. The metric value is used by the router to prioritise routes. The lower the value, the higher the priority. To give the route the highest
priority, set it to 0.
7.
Click the
Save
button to save your settings.
Summary of Contents for NTC-6200-01
