19
Setting up VoIP (continued)
4.
You’ll find your VoIP details in the email sent to you
when your VoIP service was acitvated. Use them to fill in
the following:
Wan Interface:
PVC0
Display Name:
Your VoIP number
Username:
Your VoIP number
Register Name:
Your VoIP number
Register Password:
Your VoIP password
Domain:
Your VoIP SIP server
Registrar/Proxy Server:
Your VoIP SIP server
Use Outbound Server:
Disable
Outbound Proxy:
Your VoIP SIP server
5.
Click
Save
to save your settings. Wait 2-5 minutes,
and then try to make a call using a handset that’s
plugged in to the grey
Phone port
on the back panel
of your modem.
If you can’t make a call, please double check your settings. If
you need a hand, you can contact our friendly Support Team
using the information on the back cover of this guide.
VOIP SIP SERVERS
The iiNet Group has different SIP
servers for each state or territory.
You’ll need to replace “STATE” with
ACT, NSW, NT, QLD, SA, TAS, VIC or WA.
iiNet:
sip.STATE.iinet.net.au
Westnet:
sip.STATE.westnet.com.au
If your VoIP service provider isn’t
shown above, please contact your
provider or check their website to find
out which SIP server you need to use.