Netberg Aurora 710, Installation Manual

Page: 16 / 28

Hardware Installation
11
2.6. Power supply
Equipped with two supply modules, the switch can operate with either one or two power supply
modules. If the switch uses two power supply modules, you can hot-swap one of the PSU during
the operations.
One PSU is enough for a fully loaded chassis.
2.6.1. Replacing a PSU
1. Hold the PSU handle and press the release latch to unlock from the switch.
2. Pull the PSU module out of the switch.
Figure 2.7. Removing the PSU module
FAN
PS
1
2
3
4
1
2
E
E
E
3. Align the PSU with the switch bay.
4. Slide the PSU into the switch and push until it is flush with the bay.