Netberg Aurora 710, Installation Manual

Page: 10 / 28

Hardware Installation
5
2.3. Installation into a Rack
The switch can be mounted in a standard 19"(1U) rack using the provided mounting brackets.
The following section will explain how to install the rack-mount brackets onto the switch and then
mount the switch into a standard 1U rack-mount unit.
1. Use the supplied screws to attach a mounting bracket to each side of the Switch.
2. Align the holes in the mounting bracket with the holes in the rack.
3. Insert and tighten screws through each of the mounting brackets.
Figure 2.2. Front brackets installation
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 5
2 6
2 7
2 8
2 9
3 0
3 1
3 2
2 1
2 2
2 3
2 4
Au
r o
r a
7 1
0
R ES ET
PS1
PS2
F A N
SYS
E1
/33
E2
/34
Two individuals are recommended to install the switch. One individual should position
the switch in the rack, while the other secures it using the rack screws.
The switch can be installed directly on the rack without the use of the rail.
1. Align the built-in mounting ear to the rack holes.
2. Tighten the screws to secure the switch.