manualshive.com logo in svg

NetApp StorageGRID Webscale 10.4, Installation And Maintenance Manual

Share
Download
NetApp StorageGRID Webscale 10.4 Installation And Maintenance Manual Download Page 52

Where to go next

After you install the StorageGRID Webscale appliance, you might want to perform additional
StorageGRID Webscale configuration steps.

You might want to complete the following tasks:

•

Install and configure the StorageGRID Webscale software.

See the software installation instructions.

See the 

Administrator Guide for configuration information.

•

Integrate and verify client API connections (CDMI, S3, or Swift).

See the appropriate API guide.

You use SANtricity Storage Manager to complete the following tasks:

•

Connect to each StorageGRID Webscale appliance.

•

Verify receipt of AutoSupport data.

For details, see the StorageGRID Webscale and SANtricity documentation.

Related information

StorageGRID Webscale 10.4 Administrator Guide
StorageGRID Webscale 10.3 Cloud Data Management Interface Implementation Guide
StorageGRID Webscale 10.4 S3 (Simple Storage Service) Implementation Guide
StorageGRID Webscale 10.4 Swift Implementation Guide
StorageGRID Webscale 10.4 Software Installation Guide for OpenStack Deployments
StorageGRID Webscale 10.4 Software Installation Guide for VMware Deployments
StorageGRID Webscale 10.4 Software Installation Guide for Red Hat Enterprise Linux
Deployments
NetApp Documentation: SANtricity Storage Manager

52

Summary of Contents for StorageGRID Webscale 10.4





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands