Appliance Installer. Contact technical support to upgrade the Appliance Installer to version 1.7
if required.
3. From the menu bar of the StorageGRID Webscale Appliance Installer web page, click Configure
Network Connections.
The Configure Network Connections page appears, with sections for configuring the 10GbE
ports, the Admin Network, the Grid Network, and the Client Network.
4. To set the IP address for management port 1 on the E5600SG controller, go to the Admin
Network section of the page, and click Change Static IP/netmask.
The button name changes to Save Changes and a pop-up appears.
5. In the pop-up, click OK.
6. Enter the IP address for management port 1 on the controller, and click Save.
The route information is displayed, based on the specified IP address.
7. If needed, edit the route, and click Save route.
8. Click Home to return to the main Appliance Installer web page.
Verifying connectivity
You should verify the connectivity from the management ports on both the E2700 controller and the
E5600SG controller to ensure that they are working, ensure that both controllers have valid IP
addresses, and verify SAS interconnect connectivity.
Before you begin
You must have access to the service laptop with SANtricity Storage Manager installed.
36 | StorageGRID Webscale 10.4 Appliance Installation and Maintenance Guide
Summary of Contents for StorageGRID Webscale 10.4
Page 2: ......
