X.
Step
7
Move console cable back to the
TARGET
node.
8
Enter:
y
if the question
"Was the restore backup procedure successful? {y|n}"
was asked.
9
Enter: y to the below question:
10
Enter:
y
if the question
"Do you
want to reboot now? "
.
11
Go to section XII "Boot the Operating System - 'giveback' if applicable".
NOTE
A
HA
system will be rebooted up to a
"Waiting for giveback...."
or if
non-HA
to the
"login"
prompt.
Do not press Ctrl-C
during the boot process.
Page 20 of 25
FAS2500 Model : Transfer the System Files using Non-Disruptive Procedure (cont.)
Action Description
"The restore configuration has been copied
from the HA partner to this node,
would you like to use this restored copy
now? {y|n}"
Was the restore backup procedure successful? {y|n}
y
The restore configuration has been copied
from the HA partner to this node,
would you like to use this restored copy
now? {y|n}
y
Boot device: /dev/da0 found...
Checking /dev/da0s1 file system... success.
Mounting /dev/da0s1 to /cfcard... success.
Checking /cfcard/x86_64/freebsd mount point... success.
Gzip checking /var/home/root/varfs.tgz... success.
Restoring backup configuration...
Backup Configuration from Mon Jun 13 10:14:10 UTC 2016 successfully restored
The node must be rebooted to start using the newly installed software. Do you
want to reboot now? {y|n}
y
Rebooting...
ontap_varfs: /cfcard is not mounted! Skipping /var backup.
Terminated
.
......
......
......
Waiting for giveback...(Press Ctrl-C to abort wait)
Waiting for giveback...(Press Ctrl-C to abort wait)
Boot Device Replacement for the FAS2500
For NetApp Authorized Service Engineers
Step 8:
Enter:
y
Step 9:
Enter:
y
Step 10:
Enter:
y
System will be rebooted up to
"Waiting for giveback...."
if HA or
"login"
Do NOT Press Ctrl-C during the boot process!
