•
5 mm Allen wrench; magnetic Allen wrench is recommended
•
Needle-nose pliers
•
Step ladder so that you can easily access the Allen screws in the top hinge
Steps
1. Remove the screws securing the top hinge from the system cabinet frame, and set the screws and
hinge aside.
Attention:
Be careful when removing the Allen screws to avoid dropping them into the cabinet
frame. Spare Allen screws are provided in the spares kit that shipped with your system cabinet.
2. Remove the screws securing the bottom hinge from the system cabinet frame, and set the screws
and hinge aside.
4
5
1
2
3
1
Door grounding screw with grounding wire spade
2
Grounding wire
3
Frame grounding wire lug
4
Top front door hinge with hinge pin held by retaining clip
5
Lock catch
3. Reverse the hinge pin from the top hinge:
a. Lift the hinge pin and expose the retaining clip on the hinge pin shaft.
28 | 42U 1280 mm System Cabinet Guide
Summary of Contents for 42U 1280 mm System Cabinet
Page 2: ......
