System cabinet #3
System cabinet #1
System cabinet #2
2. If you are installing the interconnect kit with the side panels on as recommended, reinstall the
side panels that were removed during unpacking:
a. Lift the side panel, tilting it about 15 degrees away from the system cabinet bottom, and then
hang it over the lip at the top of the system cabinet frame.
b. Gently push the side panel against the cabinet frame, and then lock it in place with the key.
c. Repeat these substeps for the remaining side panels.
3. If you are installing the interconnect kit with the side panels removed, remove the front door
whose hinges are on the edge where the cabinets meet:
a. Unlock and open the front door that is being removed.
b. Use the following illustration for reference to unplug the power to the illuminated bezel:
Installing a system cabinet | 11
Summary of Contents for 42U 1280 mm System Cabinet
Page 2: ......
