background image

UPSIDE-DOWN MICRO-EMITTERS 

HANDBOOK 

 

5

Objectives of this document

This document's purpose is to present the basic concepts regarding upside down micro-sprinklers/emitter 

systems for protected crops, to familiarize the reader with the system components and their functions, 
and to provide an understanding of the parameters by which to select the optimal system for each 
application.

It is intended for Netafim's personnel, its representatives and agents across the globe and for its clients, 
their decision makers, managers and operational personnel.

The importance of thorough knowledge of the subjects discussed in this document for the selection and 

effective operation of the micro-sprinkler/emitter system cannot be overemphasized.

ATTENTION

This document is not a user manual. For detailed instructions pertaining to the operation, 

maintenance and troubleshooting of the components of the Netafim™ micro-sprinkler/emitter 

system, refer to the user manuals and documentation of each component supplied with the system.

This document should be available to the farm's personnel at any time for consultation on subjects 

concerning the correct application and current operation of the micro-sprinkler/emitter system.

In addition, Netafim's irrigation products department is at the client's service for any inquiry, advice or 

additional information required after reading this document.

Safety instructions

All local safety regulations must be applied when installing, operating, maintaining and troubleshooting the 

Netafim™ micro-sprinkler/emitter system and its components.

INTRODUCTION

WARNING

When handling nutrients, acids and chemicals, always use protective equipment,
gloves and goggles.

WARNING

In an agricultural environment - always wear protective footwear.

WARNING

Measures must be taken to prevent the infiltration of nutrients, acids and chemicals into the water 
source.

Summary of Contents for COOLNET PRO

















































Reviews: