Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
23
Deleting the static route :
Command
(conf)# ip route del default|all
(conf)# ip route del <net> <mask> [<ifname>] [<gw>]
Parameters
default
Removes the default route
all
Removes all static routes and RIP entries
<net> <mask>
Identifies the particular routing entry
[<ifname>]
Name of the interface through which a packet addressed to
this
destination
will
be
sent.
<gw>
The address of the gateway to use for that destination
network.
Usage
examples
(conf)# ip route del all
(conf)# ip route del 210.10.10.0 255.255.255.0
(conf)# ip route del default
Viewing the Routing Table
To display information for the routing table, use the following
command.
Command
show ip route
[-a]
Parameters -a
Display all routes in the routing table.
Usage
Examples
(conf)# show ip route
destination netmask gateway met ifname type
---------------------------------------------------------------------
default * 0.0.0.0 1 wan static
210.10.11.0 255.255.255.0 168.126.188.100 1 lan static
168.126.188.0 255.255.255.0 168.126.188.130 0 lan connected
Note:
The SIA2410R dynamically adds a directly connected route. The value
in the type column is “connected”.
Note:
Routes pointing to local machines are labeled local, with a single route
for each local IP address.
