Net To Net Technologies SIA2410R User Manual
Net To Net Technologies
15
1.
If you enter the correct password, the command-line prompt appears
as follows:
SIA2410R(conf)#
2.
To exit the configuration mode, enter the Exit command at the prompt:
SIA2410R(conf)# exit
Note
:
The default password must be typed in lower case. If the properly
typed default password does not work, check whether the ‘Caps Lock’
key is pressed or not.
Changing a Password
Both the ‘login’ and the ‘configuration’ mode passwords may be
changed from the configuration mode. It is advised that both
passwords be changed as part of the configuration process to prevent
unauthorized access.
Changing a password for Login Mode.
Command
passwd
Usage Examples
SIA2410R(conf)#
passwd
Enter login password:xxxx
New password:yyyy
Re-enter new password:yyyy
Changing a password for Configuration Mode.
Command
passwd config
Usage Examples
SIA2410R(conf)#
passwd config
Enter config password:xxxx
New password:yyyy
Re-enter new password:yyyy
