Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
FOX1024s Moving Light Controller.
PAGE: 28
9.8
PLAYBACK of Program
Push up Playback Fader or press Playback Key to run the corresponding program.
TIPS1:
Press
CLEAR
firstly to ensure there is no data of Manual-Run to affect the playback running.
TIPS2:
Ensure Master Faders of
Playback
and
Grand
are pushed up before running playback to
avoid no output of Dimmer.
Up to 10 playbacks can run at the same time.
All HTP channels will follow playback faders
to fade in/out. LTP channels will instantly
start(LTP-inst) once the playback fader is
pushed, it can also be set to follow playback
fader to fade in(LTP-fade)
9.8.1 Turn Pages of Playback
Turn pages of playbacks by
Playback Page Key
. Press and hold the key for fast turning.
TIPS:
Playback fader that pushed up will keep outputting after page is turned, the program of the
same fader in the new page will not be output until the fader is pulled down to 0 and pushed up again.
9.8.2 Playback Key
In Playback Running menu, press F4 soft key to switch the controlling mode of Playback Key to be
Swop, Flash or LTP output.
Swop
--- Only 1 playback can be output at the same time.
Flash
--- Press and hold
Playback Key
, the program will be output; Release to stop it.
LTP output ( * )
--- Output LTP channels in advanced without Dimmer output. Then push up
Playback Fader to output Dimmer.
9.8.3 Use “Playback Menu”
Playback menu is used to set the run parameters
of “Multi-Step Program”. Press
TIME/PB
key to enter
Playback menu, select program by
Playback Key
, then
set the speed(Auto1), Run Mode, Start and End way of
the current program. As shown on the right:
Run Mode
There are 3 modes of Synchronous trigger
to run “Multi-Step Program”;
Auto 1
：
the running of “Multi-Step Program” is controlled by external speed.
(In this mode, all steps will ignore the internal speed and run the external speed.)
Auto 2
：
the running of “Multi-Step Program” is controlled by internal speed.
Music
：
the running of “Multi-Step Program” is triggered by Music rhythm.
TIPS
：
Differences between internal speed and external speed of “Multi-Step Program”:
--- Every “Multi-Step Program” has its own external speed which can be set in Playback Menu,
the pace of all steps in the program will be the same while the program run external speed.
--- Every step of “Multi-Step Program” has its own internal speed, in EditStep menu, internal
speed of each step can be customized individually.
Status Current Step Value of fader/HTP/LTP
Program No. Total Steps Running Mode
External Speed(
Auto1)
