Gottlieb
Nestle
GmbH | Freudenstädter Str. 37-43 | 72280 Dornstetten
| www.g-nestle.de
•
Creates a surface (closed polyline) from three or more points. For the starting point tap on
of the area to measure or activate a point by tapping in the graphic. Tap
for the second
point and tap
for each additional point of the area.
•
Creates a text / comment.
•
Assists in capturing inaccessible points by capturing two eccentric points and entering the
distance from the second point to the inaccessible Period. H1, H2 and P are in a straight line.
▪
Position the system on point H1, tap on
▪
Position the system on point H2, tap on
again.
▪
A field opens for entering the distance from H2 to P3.
▪
Enter the value in meter.
▪
Point P is saved, H1 and H2 are not saved.
•
Creates a symbol / block. The position is saved by tapping on
. A field for selecting a
symbol / block opens. Select a symbol / block from the pull-down list and, if required,
enter a scaling factor in the second field.
Note: Symbols / blocks can be loaded into on2go by importing a DXF file which contains
symbols / blocks.
•
Creates a perpendicular line to an activated line. Activate it in the graphic by tapping
a line. Position the system and tap
. The point is captured and In addition, a vertical
line is drawn on the activated line.
Auxiliary point H1
Hidden point P3
Distance H2
–
P3
Auxiliary point H2
