NESTLE 26032001 User Manual Download Page 10

Page: 10 / 88

Gottlieb

Nestle

GmbH | Freudenstädter Str. 37-43 | 72280 Dornstetten

| www.g-nestle.de

Install, register and extend license of NESTLE on2go

8.1 Installation

•

Connect to the Internet via mobile data or WiFi.

•

tap on

icon,

•

enter NESTLE on2go in the search field,

•

choose

•

tap on install and wait until the installation is complete.

•

When the installation is complete, press the home button.

8.2 Register

•

• A connection to the Internet is required for registration, please establish

such a connection.

•

Tap on

, to start the App,

•

follow the app's prompts to register the app.

During the registration process, only enter a valid email address to which you have access,
as your access data will be sent to it.

Summary of Contents for 26032001

























































































Search results

Summary of Contents for 26032001

Reviews:

Related manuals for 26032001

Brands by name

Popular brands

NESTLE 26032001, User Manual

Search results

Summary of Contents for 26032001

Reviews:

Related manuals for 26032001

Brands by name

Popular brands