
Page 9
keyhole. Then slide the box down so that the box is securely fitted. The
keyhole is positioned opposite the entrance hole into the box so that it is
easy to see through for fitting, and the screw can be tightened once the box
is fitted. If you wish to secure the box with a second nail or screw, a hole
in the base/back of the box has also been provided, although in most situa-
tions this will not be needed.
Rope, string or wire can also be used to fit the box.
To do so, pass a loop of string etc through the key-
hole, and attach it to a small twig, nail etc.
Making sure this is pulled back to the keyhole,
but not through it, tie the string etc round the
tree.
It is best to fit the Nest Box upright or tilted slightly forward to give some
protection from driving rain.
Position the box away from other trees, bushes, branches etc which may
make it easier for predators. Try to provide a clear flight path into the
entrance hole. It is recommended that you do not place it near to a bird
table or other place where you feed the birds, because the constant traffic
of birds will deter nesting
The Battery box should be mounted with its cable exit holes at the base.
Page 7