47 |
P a g e
Ness IQ-SDI Users Manual
①
Click (
) Motion Event frame and select Motion Event 1.
②
Select cameras for recording when Motion Event 1 is on. Please check
a check box under Link Camera. More than
two cameras can be set.
③
Select alarm outputs to be worked when Motion Event 1 is on. Please check
a check box under Link Alarm Out. More
than two alarm outputs can be set.
④
Select E-mail addresses for notification when Motion Event 1 is on. Please check
a check box under Link Notification.
More than two E-mail addresses can be set.
⑤
Repeat the above procedure for Motion Event 2~ Motion Event 16.
Click (
)By Duration box to set up the recording duration and prevent recording caused by event.
The duration time can be controlled by previous setting mode:
RECORD>Settings>Event
Choose ‘OK’ to confirm the setting.
4.6.3 Video Loss
Please
click (
) LINK>Video Loss
and the following screen will appear.
Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
Link Notification displays E-mail addresses registered in
DEVICES>Network>Notification
.
Please follow the setup procedures below.
①
Click (
) Video Loss frame and select Video Loss 1.
②
Select cameras for recording when Video Loss 1 is on. Please check
a check box under Link Camera. More than two
cameras can be set.
③
Select alarm outputs to be worked when Video Loss 1 is on. Please check
a check box under Link Alarm Out. More
than two alarm outputs can be set.
④
Select E-mail addresses for notification when Video Loss 1 is on. Please check
a check box under Link Notification.
More than two E-mail addresses can be set.
⑤
Repeat the above procedure for Video Loss 2~ Video Loss 16.
Click No Beep
to deactivate alert sounds from video loss. Apply to all channels.
Choose ‘OK’ to confirm the setting.
4.6.4 System Event
Please
click (
) LINK>System Event
and the following screen will appear.
