Ness IQ-SDI-16 User Manual Download Page 20

Page: 20 / 58

20 |

P a g e

Ness IQ-SDI Users Manual

4.2 SYSTEM

4.2.1 Information

Please

click (

) SYSTEM>Information

and the following screen will appear.

Site Description

Input the name of DVR.

Please

click (

) keyboard

icon on Site Description frame and the following virtual keyboard will appear.

Please click (

) desired letters (characters) on the virtual keyboard to input.

Use to erase one character every time.

Use to erase the whole sentence.

Please choose ‘OK’ to confirm the input and choose ‘Cancel’ to cancel.

System ID

Control DVRs by one remote controller by setting DVR IDs.

Please click (

)

▲

▼

direction keys on the right-hand side of the System ID frame to set the ID of DVR. Take any whole

number between 1 and 255.

While pressing (+) or (-) button, the System ID value increases or decreases by 10 units.

Language

Please

click (

) Language

frame to choose desired language and press (

) key again.

Setup

Default:

Click (

) Default

frame to restore all setup values of menus to factory default settings. Please note that System Log

is not initialized.

Status

Summary of Contents for IQ-SDI-16



























































Search results

Summary of Contents for IQ-SDI-16

Reviews:

Related manuals for IQ-SDI-16

Brands by name

Popular brands

Ness IQ-SDI-16, User Manual

Search results

Summary of Contents for IQ-SDI-16

Reviews:

Related manuals for IQ-SDI-16

Brands by name

Popular brands