
AC-5000 User Guide
44
only. The setting type can only be inquired at the terminal.
However, when Bypass is checked, regardless of Wiegand Out settings, it transmits the
data received by Wiegand Input at the time when authentication was successful to the
Wiegand Output as it is.
The user can exit to the parent menu using [ENT~] key to apply the changed value after
finishing the setting while using [F4(
←
)] key to cancel input during setting.
3.7.5. Card Reader
When the user selects [ENT~]
[5. Terminal]
[5. Card Reader] in the initial screen
◆
,
the following screen will appear.
▶
Initial setting: Identical with the screen at the left
▶
Read Card NO.
When the user puts the card on this screen, the
card number will be displayed on the LCD.
▶
Card Format
This is the menu that sets the manner of displaying the card number. As shown below,
the displayed card number varies depending on the configuration. Therefore, if
changing it during operation is unavoidable after it was set during initial installation, the
card should be registered again.
RFcard example) Card number (5byte): 08h 01h 16h 1Dh D6h
Card Format
Card Number Method of Expression
1. Default
02207638
(3+5)
digit
decimal
number
[022(16h)+07638(1DD6h)]
2.
Hexadecimal
number
0801161DD6
10-digit hexadecimal number
3.
Decimal
number
0018226646
Last 4byte to be expressed in a 10-digit decimal
number (01161DD6h)
4.
Decimal
number 35
02207638
Same as ‘1. Default’
SCcard example) Card Number (4byte): 52h 9Dh 06h E3h
Card Format
Card Number Method of Expression
1. Default
529D06E3
Expressing in an 8-digit hexadecimal number
2.
Hexadecimal
E3069D52
Expressing in an 8-digit hexadecimal number
changing the order of byte