AC-5000 User Guide
19
In case of selecting an item out of the given sample like ‘Fake Finger Detect’, user
must modify the item selection (
) by pressing the relevant number key, provided
that, user must select the item after moving the focus from the input box by pressing
[ENT] key if the focus is located at the input box as shown in <Figure 3-5>.
<Figure 3-5> Move Focus (using [ENT] key)
Error!
Error!
Error!
Error!
As shown in the figure at the left, the letter is displayed in a reverse type when the
focus is located at input box. As shown in the figure at the right, the applicable
letters are displayed in black instead of grey when the focus moved to ‘Fake Finger
Detect’
▶
③
Check Box
In case the user must select whether or not checking like ‘Check SameFP’, the
user can either select (
) or release (
) by pressing the relevant key [5]. If it is
impossible to select the relevant item, it is displayed in (
)
Press [F4(
←
)] key to cancel in the course of setting and move to the parent menu.
When the focus is located at the input box, [F4(
←
)] key functions as [DEL] key that
deletes the figures one by one. In this case, press [F4(
←
)] key for two seconds or
longer to cancel input and exit to the parent menu. Press [ENT] key for two seconds
or longer to save the current configuration and move to the parent menu.
3.1.4. Save environment settings
Press [F4(
←
)] key in the main menu screen of <Figure 3-1> to save the settings
changed, then the following screen will appear.
<Figure 3-6>
Select [1.Yes] to save the revised contents or [2.No] to cancel it, and then press
[ENT] key. If there is no input for a certain period of time in this case, it returns to
