AC-5000 User Guide
42
▶
Initial setting: Identical with the screen at the left
Sets Voice Volume and Beeper Volume.
When set to ‘0’, no voice or buzzer sound is
generated.
The user can exit to the parent menu using [ENT~] key to apply the changed value after
finishing the setting while using [F4(
←
)] key to cancel input during setting.
.
3.7.3. Door
When the user selects
◆
[ENT~]
[5. Terminal]
[3. Door] in the initial screen
◆
,
the following screen will appear.
▶
Initial setting: Identical with the screen at the left
▶
Lock Type
Set to ‘1’ when strike type or automatic door is connected with the terminal while ‘2’
when motor lock is connected to the terminal. In case that no connection is made, it is
also set to ‘1’. Set to ‘3’ when connecting the warning lamp to the lock port to indicate
the success or failure of authentication.
▶
Door Monitor
Set this function to know the door status
- ‘3.Disable’ – when not checking the door status
- ‘1.Normal Open’: In the case of dead bolt type or automatic door
(When lock monitoring is open where the door is locked)
- ‘2.Normal Close’: In the case of Strike type
(When lock monitoring is locked where the door is locked)
▶
Open Duration (0.1 sec unit)
It designates the time that the door is opened and closed again when authentication is
successful. As it is set to 0.1 second unit, a value of 30 is required to set it to 3 seconds.
Strike type refers to the time the door is opened and closed again when authentication
is complete.
▶
Warn Door Open (Second unit)
This is the function that enables the terminal to check the time of the door being
