AC-5000 User Guide
26
successfully authenticate using fingerprint
without any user ID or card.
3.3.1.6. Save
When registration process is finally completed, press [6] key to save it. In this case, the
user is not saved if the user doesn’t press [6] key but exits by pressing [F4(
←
)] key..
The following is the LCD guidance message indicating that the user can exit from the
registration process.
When it is registered normally with [6. Save] key pressed
When registration is failed with [6. Save] key pressed
When the registration means is not registered properly in
accordance with the authentication method, for
example, the user didn’t register any fingerprint after
setting it as authentication means, nor register any card
after setting it as authentication means.
In the case of [2. FP Register]
When fingerprint image is not in good condition or there
is no fingerprint input for 10 seconds after the fingerprint
sensor lamp is on
At the time of fingerprint registration, when the user
didn’t input the same fingerprint but inputs a different
fingerprint
In the case of [4. PW Register]
When the user inputs a different number during
verification after inputting the password
