Nespresso ESSENZA PLUS, Instruction Manual

Page: 22 / 28

22
Troubleshooting
EN
No light indicator. - Check the power outlet, plug, voltage, and fuse. In case of problems, call Nespresso .
No coffee, no water.
- First use: fill water tank with warm water (max. 55° C) and run through machine according to instructions on page 12.
- Water tank is empty.
Fill
water tank.
- Descale if necessary; see Descaling section.
Coffee comes out very slowly.
- Flow speed depends on the coffee variety.
- Descale if necessary; see Descaling section.
Coffee is not hot enough.
-
Preheat
cup.
- Descale if necessary.
Capsule area is leaking (water in capsule container). - Position capsule correctly. If leakages occur, call Nespresso .
All 3 beverage buttons blinking fast.
- Machine is in error, overheating or in an environment below 0°C / 32°F. Please wait for all buttons to stop blinking , this may take a few minutes.
- If buttons still blink after a few minutes, unplug and replug the machine.
- If problem persists,
call Nespresso
.
Descaling alert blinking (descaling alert level 1). - Machine triggers descaling alert according beverages consumption usage. Descale machine.
Descaling alert steady light (descaling alert level 2).
-
Machine triggers descaling alert according beverages consumption usage. Descale machine immediately to avoid machine performance and coffee
quality decrease.
Irregular blinking. - Send appliance to repair or call Nespresso .
No coffee, just water runs out (despite inserted capsule).
- In case of problems, call Nespresso .