Nespresso Breville, Instruction Manual

Page: 11 / 16

EN
11
To ensure hygienic conditions, it is highly recommended emptying/cleaning the used capsule container every day.
Push all the 3 controls simultaneously for at least
3sec. A short beep will confirm it. The control area
will start blinking quickly. Close the slider to start
descaling. Machine stops when water tank is empty.
Blinking light: heating up.
Steady light: ready
To enter the descaling mode, at slider closed
push all the 3 controls simultaneously for at
least 3 sec. A short beep will confirm it. Open
the slider.
Place a container (minimum volume: 0.6 L / 20 oz)
under the coffee outlet. Activate the machine by pushing
one of the cup selection touches.
Fill the water tank with 1 unit of Nespresso
descaling liquid and add 0.5 L /17 oz of water.
To exit the descaling mode, push all the 3 controls
simultaneously for at least 3sec. A short beep will
confirm this. The machine is now ready for use.
Empty and rinse the water tank, capsule
container, drip tray and cup support
thoroughly. Fill water tank with potable
water. When ready, touch any control to
rinse the machine. Machine will stop
when done.
Refill the water tank with
the used descaling solution
collected in the container and
touch any control to repeat
the procedure.
Empty the drip tray and the
used capsule container.
1
1
1 7
0.5 L
1
2
1 9
1
4
1
2
1
5
3 sec 3 sec
1 8
max.
1
2
1 6
1
3
36
18
3
Nespresso descaling kit: Ref. 3035/CBU-2
Water hardness: Descale after: °fH French degree
°dH German degree
CaCO3 Calcium Carbonate