Nespresso Breville, Instruction Manual, Page: 12 / 16

EN
12
Open slider. Press and hold the
Ristretto & Lungo controls together for
at least 6 sec. The other control flash
for confirmation. Then close the slider
to start procedure.
To note, the machine remains blocked for
10 minutes after emptying!
Remove the water tank. Place a container
under the coffee outlet.
Press and hold the Espresso & Lungo
controls together for at least 4 sec. The
other control flashes for confirmation.
Factory settings are:
1. Lungo, Espresso, Ristretto controls 110 ml,
40 ml, 25 ml.
2. Automatic OFF mode after 9 minutes.
3. Most frequently chosen cup size as Espresso control
at 40 ml.
Touch and hold the control while closing
the slider. Release control when desired
volume is reached. The other 2 controls
flash for confirmation.
Any control can be programmed.
Completely open the slider and insert
a Nespresso capsule.
Machine turns to OFF mode automatically
when empty.
PROGRAMMING THE WATER VOLUME RESET TO FACTORY SETTINGS
EMPTYING THE SYSTEM before a period of non-use, for frost protection or before a repair
1
2
1 1
1
2
3
1 2 1
1
2
1
1
2
3
> 4 sec
6 sec
Power
Off
1 3 1 1 1 2
DISPOSAL AND ENVIRONMENTAL PROTECTION
This appliance complies with the EU Directive 2002/96/EC. Packaging materials and appliance contain recyclable materials.
Your appliance contains valuable materials that can be recovered or can be recyclable. Separation of the remaining waste materials into different types facilitates the recycling
of valuable raw materials. Leave the appliance at a collection point. You can obtain information on disposal from your local authorities.