Nespresso AEROCCINO 4, Manual

Page: 20 / 138

18
EN
The device does not
start
- Ensure the jug is correctly positioned on the base, and the whisk is correctly positioned in the jug.
Device will start only if the connectors are dry.
Quality milk froth not
up to standard or milk
is burnt
- For optimal milk froth, use cold and semi skimmed milk at refrigerated temperature (about 4-6° C). To guarantee hygiene conditions, use heat treated milk
(pasteurized), refrigerated & freshly opened only.
Milk which has been frozen will not froth.
Be sure the jug and the whisk are clean.
- Do not use enriched milks, reconstituted powdered milks or flavoured milks.
Fast red lights blinking
on the 4 buttons
(device error)
- The device is too hot: clean the jug under cool water.
- Not enough milk: fill the device up to one of the two “max” level. All the 4 buttons (1 blue and 3 red) blink rapidly.
- Clean the device and check that there is no water on the base.
- If no change, then please call Nespresso .
Milk overflows - For milk froth preparation ensure the milk does not exceed the MAX FOAM level (120 ml).
- For hot milk preparation, ensure the milk does not exceed the MAX MILK level (240 ml).
Troubleshooting