12
(5)SCALE
Press / to select ON/OFF
Press CH- to select CAM1-SCALE.
.
CAM1,CAM2,CAM3,CAM1-SCALE,CAM2-SCALE,CAM3-SCALE options display on the
screen as
illustrated below:
Press CH- to select CAM1.
Press / to adjust the PARK LINE position as below:
Press / to move the PARK LINE to LEFT or RIGHT.
Press CH- to change the PARK LINE as UP DOWN mode.
Press /
to move the PARK LINE to UP or DOWN.
Press MENU to exit.
SCALE
CAM1 OFF
CAM2 OFF
CAM3 OFF
CAM1-SCALE
CAM3-SCALE
CAM2-SCALE
1
3
9
.
Troubleshooting
The Symptoms
described
below
do
not necessar
ily
mean
a
failure with
in
the
display.
Please check
the
following
items
before you
initiate
request for repair.
Symptom
Possible Causes/
Solutions
No picture
No picture
Dark picture
No color
Upside down or lateral
inverted picture
No reversing function
(i.e. Picture)
Improper connection
of
a
utomobile
Use of un-
authorized power supply. Power
s
witch is on
OFF
position.
adapter.
Check whether AV
cable
is
properly
connected
.
Check whether bright
ness
and contrast
are
adjust
ed
correctly;
Check whether
the
environment
s
temperature
is
too low.
Adjust the color settings.
T
he black
wire
of the monitor AV
cable
to the
reversing light
may
be
loose.
T
he
red wire from the monitor may be loose.
Use
the
remote
control
horizontal /vertical selection switch to set
proper orientation.
No picture
SYSTEM.RESOLUTION is not the same as camera inputs.
Solution is setting SYSTEM.RESOLUTION the same as
camera inputs or AUTO.
