Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Professional Installation
In accordance with section 15.203 of the FCC rules and regulations, the L900
MIU must be professionally installed by trained utility meter installers.
Industry Canada (IC) Statements:
Section 8.4 of RSS-GEN
This Device complies with Industry Canada License-exempt RSS standard(s).
Operation is subject to the following two conditions: 1) this device may not cause
interference, and 2) this device must accept any interference, including
interference that may cause undesired operation of the device.
.Cet appareil est conforme aux normes RSS exonérées de licence d'Industrie
Canada. L'opération est soumise aux deux conditions suivantes: 1) cet appareil
ne doit pas provoquer d'interférence, et 2) cet appareil doit accepter toute
interférence, y compris les interférences pouvant entraîner un fonctionnement
indésirable de l'appareil.
Section 8.3 of RSS-GEN
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter
by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This
radio
transmitter
IC:
4171B-L900M
2
has
been
approved
by
Industry
Canada
to
operate
with
the
antenna
types
listed
below
with
the
maximum
permissible
gain
and
required
antenna
impedance
for
each
antenna
type
indicated.
Antenna
types
not
included
in
this
list,
having
a
gain
greater
than
the
maximum
gain
indicated
for
that
type,
are
strictly
prohibited
for
use
with
this
device.
l
Maximum permissible gain of +
2.
1
5
dBi and required impedance of 75 ohm.
l
Approved Antenna type(s).
o
R900 Pit Antenna, part number 12527-XXX
o
High Gain R900 Pit Antenna, part number 13586-XXX
o
R900 Wall Antenna, part number 13717-000
* R900 Internal Wire Antenna
En vertu de la réglementation d'Industrie Canada, cet émetteur radio ne peut
fonctionner qu'avec une antenne d'un type et un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Pour réduire les interférences
radio potentielles avec d'autres utilisateurs, le type d'antenne et son gain
Summary of Contents for L900 MIU Pit
Page 2: ......
Page 3: ...L900 MIU Pit and Wall Installation and Maintenance Guide...