Neptune Technology L900 MIU Pit, Installation And Maintenance Manual, Page: 34 / 42

Magnet Swiping and Completing the Installation
Figure 20 – Securing Adapter
1. Slide the tongue on the top of the L900 MIU into the
groove on the top of the mounting adapter.
2. Secure the L900 MIU to the mounting adapter using the set
screw. See Figure 20.
Figure 21 – Magnet Swipe the
L900 MIU
3. Position the magnet against the left side of the L900 MIU
directly in line with the Neptune logo.
4. Move the magnet up and over the top left corner of the
L900 MIU. See Figure 21.
Testing the Installation
To test the installation, complete the following steps.
To avoid RF signal saturation of the HHU, position yourself at
least two to three feet from the L900 MIU.
1. Power up the HHU test device and start the testing programs
provided.
20 L900 MIU Pit and Wall Installation and Maintenance Guide
Chapter 4: Wall Installation