Neptune Technology E-Coder)R900i, Installation And Maintenance Manual

Page: 40 / 52

Maintenance and Troubleshooting
26 E-Coder)R900 i Installation and Maintenance Guide
7 Cut the replacement battery wires one at a time, as close to the con-
nector as possible. See Figure 24.
Figure 24 Cutting Replacement Battery Wires
8 Use Scotchlok to splice the wires from the new battery casing to the
wires that were connected to the old battery casing. See Figure 25.
Figure 25 Using Scotchloks to Splice Wires
9 Attach new battery pack to hinges and swing down into position.
Be careful not to pinch any wires during this procedure.
Figure 26 Attaching New Battery Pack
10 Push in new register seal pin until it snaps.
Figure 27 Pushing Seal Pin