Neptune Technology E-Coder)R900i, Installation And Maintenance Manual

Page: 42 / 52

Maintenance and Troubleshooting
28 E-Coder)R900 i Installation and Maintenance Guide
11 Using a torque wrench, connect the coaxial cable connector to the
"F" connector on the MIU/register housing, tightening it to 15 foot-
pounds. See Figure 30.
Figure 30 Connecting the Coaxial Cable
12 Make sure the washer is properly seated. Connect the plastic
connector housing to the 3-lobed black plastic latch plate.
See Figure 31.
Figure 31 Connecting the Plastic Connector
13 Slide the black conical-shaped gasket down the cable until it
engages the connector housing. See Figure 31.
14 Tighten the connector nut onto the threaded portion of the connec-
tor housing. This connection should be hand-tight. Do not use pli-
ers. See Figure 30.
Contact Information
Within North America, Neptune Customer Support is available Monday
through Friday, 8:00 AM to 7:00 PM Eastern Standard Time by
telephone, e-mail, or fax.
To contact Customer Support by phone, call (800) 647-4832. You are
directed to the appropriate team of Support Specialists. These Support
Specialists are dedicated to you until the issue is resolved to your
satisfaction.
To contact Customer Support by fax, send a description of your problem
to (334) 283-7497. Please include on the fax cover sheet the best time of
day for a Support Specialist to contact you.
To contact Customer Support by email, send your email message to
hhsupp@neptunetg.com