![background image](http://html1.mh-extra.com/html/aim/mychron-4/mychron-4_technical-documentation_2871761001.webp)
Technical Documentation - Datasheet MyChron 4 – Version 1.00
1
TECHNICAL DOCUMENTATION 13/02/2006
LOGGER
Notes:
MyChron 4
technical documentation, dimensions and pinout
Version 1.00
MyChron 4
Figure 1:
Display
MyChron 4
Introduction
MyChron 4
represents the new philosophy of AIM data acquisition
systems: a data logger with graphical display, easy to configure, easy to
read and, what make sit unique: expansible.
MyChron 4
has a graphical display that allows you to see the graphical
representation of your values, configurable RPM, Optical or Magnetic Lap,
1 Mb internal memory and capacity to record up to 1000 lap with up to 4
splits or 3 hours of sample at a 10Hz sampling frequency for channel, 1
temperature (water, exhaust gas or cylinder head, thermocouple or
Thermoresistor) and the automatic switch-off after 8 minutes of inactivity
(only external power versions).
Moreover
MyChron 4
computes forecast lap time and shows times as
absolutes and as difference with the previous lap.
All these potentialities can grow with the optional E-box connected via
CAN to
MyChron 4
. Thanks to this expansion acquired channels will grow
in a very simple and quick way. the E-box, in fact, has two others
temperature channels and the speed channel (that together with
MyChron
4
RPM allows you to compute and show engaged gear number).
The logger shows the following parameters:
•
1 temperature input (cooling water, cylinder head or exhaust gas,
thermocouple o Thermoresistor);
•
RPM;
•
Lap/Split
Time;
•
Logger or kart battery voltage;
The values stocked in 1Mb internal Memory can be downloaded both via
CAN on the 32 Mb Data Key memory (optional) and via USB and Data