COR User Guide
Page 19
INITIAL COR CONFIGURATION
Using the COR Task in APEX Fusion is the fastest and easiest way to do the initial
configuration of a newly-installed COR. The COR Task will guide you through the IQ-
Level adjustment process and then through basic programming of the COR. The COR
Task will also (optionally) walk you through the process of modifying your skimmer
programming so that the skimmer is turned off whenever the COR is off or running at a
lower than normal speed. To use the COR Task, login to
, select your Apex,
then click on the
(Tasks) button, then select the COR Task, then follow the prompts.
IQ-LEVEL ADJUSTMENT
To perform IQ-Level Adjustment without using the COR Task, login to APEX Fusion, click
the (Configure) button on the COR slider tile, then click the large blue IQ-Level
Adjustment button to run the COR IQ-Level Adjustment wizard.
WARNING:
NEVER start the IQ-Level process or adjust its settings while
away from your tank. You MUST be able to observe the water flow in your
tank while calibrating or tuning your COR or you may cause a flood or stop
circulation in your display tank.
Follow the steps in the IQ-Level wizard.
❖
When calibrating the maximum speed, use the left and right buttons to set the
COR so that the water in the display is stable, and that the water volume being
pumped matches the ideal water flow rate for your overflow or drain system. You
