Neoway M660 At Command Manual Download Page 31

Page: 31 / 114

Neo_M660 AT Command Set

AT+ESL=1

Set the level of echo suppression to 1.

AT+ESL=?

+ESL:(0-6)

Query the range of the command
parameter.

Remarks

The setting of this command is saved after the module is powered off.

4.12 Setting Echo Suppression Level in the Receiver Mode:
+HESL

Description

To set the level of the echo suppression level in the receiver mode

Format



AT+HESL=<value><CR>



AT+HESL?<CR>



AT+HESL=?<CR>

Parameter

<value>: Integers, ranging from 0 to 6

Return

Value

See the Example.

Example

AT+HESL?

+HESL:1

Query the current echo suppression
level.

AT+HESL=2

Set the level of echo suppression to 2.

AT+HESL=?

+HESL:(0-6)

Query the range of the command
parameter

Remarks

The setting of this command is saved after the module is powered off.

4.13 Setting Echo Suppression Level of the Loud Speaker Mode:
+LESL

Description

To set the level of the echo suppression level in the loud speaker mode

Format



AT+LESL=<value><CR>



AT+LESL?<CR>



AT+LESL=?<CR>

Summary of Contents for M660



















































































































Search results

Summary of Contents for M660

Reviews:

Related manuals for M660

Brands by name

Popular brands

Neoway M660, At Command Manual

Search results

Summary of Contents for M660

Reviews:

Related manuals for M660

Brands by name

Popular brands